Home / Products / M3 ruby styli
The middle thread, and the range that covers most CMM work. Eighteen of the most-used geometries, cataloged, from a Ø0.5 mm ball on a Ø0.4 mm carbide stem for small features to Ø3.0 mm for everyday inspection. The full M3 range runs to Ø6.0 mm and is in the catalog.
Codes are the factory part numbers. The last four digits map to the OEM number in the cross-reference column of the full catalog. Testing is quoted per line when you need it: a batch report for the parts you receive, or a per-piece certificate where your incoming inspection requires one.
| Code | Ball | Stem | Length | EWL | Typical use |
|---|---|---|---|---|---|
| BV-M3-21T-005R-7632 | Ø0.5 | Ø0.4 tungsten carbide | 21 | 2.0 | Micro features, thread roots |
| BV-M3-20T-01R-2442 | Ø1.0 | Ø0.7 tungsten carbide | 20 | 12.5 | Micro features, thread roots |
| BV-M3-30T-01R | Ø1.0 | Ø0.8 tungsten carbide | 30 | 22.5 | Micro features, thread roots |
| BV-M3-40T-01R | Ø1.0 | Ø0.8 tungsten carbide | 40 | 32.5 | Micro features, thread roots |
| BV-M3-50T-01R | Ø1.0 | Ø0.8 tungsten carbide | 50 | 42.5 | Micro features, thread roots |
| BV-M3-21T-015R-0050 | Ø1.5 | Ø1.0 tungsten carbide | 20 | 12.5 | Small bores and slots |
| BV-M3-30T-015R-0051 | Ø1.5 | Ø1.0 tungsten carbide | 30 | 22.5 | Small bores and slots |
| BV-M3-20T-02R-3676 | Ø2.0 | Ø1.5 tungsten carbide | 20 | 12.5 | Small bores and slots |
| BV-M3-30T-02R-0052 | Ø2.0 | Ø1.5 tungsten carbide | 30 | 22.8 | Small bores and slots |
| BV-M3-40T-02R-0053 | Ø2.0 | Ø1.5 tungsten carbide | 40 | 32.5 | Small bores and slots |
| BV-M3-40C-02R-3646 | Ø2.0 | Ø1.5 ceramic | 40 | 32.5 | Small bores and slots |
| BV-M3-50T-02R | Ø2.0 | Ø1.5 tungsten carbide | 50 | 42.5 | Small bores and slots |
| BV-M3-21T-025R-0054 | Ø2.5 | Ø1.5 tungsten carbide | 20 | 12.5 | Everyday inspection work |
| BV-M3-30T-025R-0055 | Ø2.5 | Ø1.5 tungsten carbide | 30 | 22.5 | Everyday inspection work |
| BV-M3-40T-025R-0056 | Ø2.5 | Ø1.5 tungsten carbide | 40 | 32.5 | Everyday inspection work |
| BV-M3-40C-025R-2545 | Ø2.5 | Ø2.0 ceramic | 40 | 32.5 | Everyday inspection work |
| BV-M3-20T-03R-7402 | Ø3.0 | Ø2.0 tungsten carbide | 20 | 14.0 | Everyday inspection work |
| BV-M3-30T-03R-0057 | Ø3.0 | Ø2.0 tungsten carbide | 30 | 24.0 | Everyday inspection work |
Not on the list? M3 styli are the easiest range to build to drawing: stepped stems, tapered stems, mixed ball sizes, offset and star configurations. Send the drawing and get feasibility in 24 hours.
Three decisions, in this order.
Rule of thumb used in most metrology labs: keep the ball diameter at least 3× the surface roughness you need to ignore, and keep the stem diameter at least 1/10 of the overall length.

| Parameter | Standard | On request |
|---|---|---|
| Ball material | Ruby (synthetic corundum) | Silicon nitride, zirconia |
| Ball grade | ISO 3290 Grade 10 (standard production) | Grade 5, imported balls, on request |
| Ball diameter tolerance | ±2 µm | ±1 µm with imported grade 5 balls |
| Sphericity | Per ISO 3290 grade 10 (≈0.25 µm) | Per grade 5 (≈0.13 µm) |
| Ball surface roughness | Typical for ruby (Ra ≤0.012 µm). Not measured unless requested; sphericity governs | — |
| Stem straightness | Held to the tolerance on your drawing | Tighter limits quoted on request |
| Thread | M3, go/no-go gauged | M2, M4, M5, non-standard |
| Report | Batch report, ISO/IEC 17025 traceable, on request | Per-piece certificate, quoted per piece |
| Stated tolerance | Grade per ISO 3290; when testing is ordered, the measured value of your parts is printed in the report | Report value governs, not this page |
| MOQ | 1 pc, evaluation samples included | Volume pricing quoted against your annual usage |
Physically yes, metrologically no. An adapter adds a joint, and every joint adds both compliance and a datum you cannot verify. If the head is M4, buy M4 styli.
Yes. Requalify the stylus after any change, even same part number. The qualification defines the ball center in machine coordinates, and that is what changes, not the stylus.
A single CMM running one shift usually consumes 6–15 styli a year, mostly from crash damage rather than wear. Ruby is hard, but it is not indestructible against a rapid move into a vise.
Send the drawing, the bore size, or just a photo of the probe head. Answer within 24 hours, with a price and a lead time.